We use cookies to make your experience better. We would like to set cookies on your browser. Learn more.
ATC SIA2-150 Stereo Integrated Amplifier
Local Delivery
“The SIA2-150 is a multi-talented amp that works incredibly well across genres and can hold your attention for hours on end”, SIA2-150 Review, What Hi-Fi?
The ATC SIA2-150 MK2 is a high-performance 150-per-channel Stereo Integrated Amplifier perfectly suited to driving ATC speakers or any other high-end speakers of your choice, Building on its professional studio audio experience, ATC has designed a powerhouse of an amplifier which has tremendous power and at the same time amazing detail and delicacy. The balance of features and power output very carefully in order to offer a Hi-Fi component that will meet a very wide range of requirements. The extremely low distortion also explains the tangibility and precision of the stereo sound stage, recreating the full presence of the recording. The simple and direct signal path within the pre-amplifier stages preserves subtle low-level information and ensures that the whole combination of the pre and power amplifier remains neutral and totally free of colourations.
Key Features
- 150 watts per channel.
- Discrete MOSFET Class A/B output stages.
- Discrete class-A low-noise input stages.
- 5 x stereo RCA/Phono inputs.
- 3 x stereo RCA/Phono outputs (preamp, subwoofer and tape).
- Headphone amplifier.
- IR Remote control.
- Hand-built in the UK & covered by a 6-year warranty.
The ATC SCA2 Stereo control pre-amplifier, designed primarily for the purpose of driving Active monitors in both Studio and Hi-Fi installations, has attracted the praise of journalists and recording engineers alike. The combination of ATC power amplifier and ATC control unit in one stylish housing makes a convenient and affordable package offering the finest sound quality possible in a single HiFi component.
ATC has chosen the balance of features and power output very carefully in order to offer a HiFi component that will meet a very wide range of requirements.
The output power of 150W is sufficient to reproduce well recorded material, Rock, Pop, Classical or Jazz at realistic levels in virtually all domestic situations. As designers of the worlds most sophisticated drive units ATC are only too aware of the requirements for a power amplifier to properly drive a real loudspeaker load. The grounded source FET power amplifier in the ATC SIA2-150, as also used in all ATC Active monitors, delivers the high current and damping to fully control any passive monitor.
The ATC SIA2-150 is however a supremely subtle and tender performer, conveying the gentler extreme of recorded dynamics with sensitivity and inner detail only possible when all distortions and non-linearities are reduced to levels well below audibility.
The extremely low distortion also explains the tangibility and precision of the stereo sound stage, recreating the full presence of the recording. The simple and direct signal path within the pre-amplifier stages of the SIA2-150 preserves subtle low-level information and ensures that the whole combination of the pre and power amplifier remains neutral and totally free of colourations.
In fact, the ATC SIA2-150 is a perfect match for the absolutely natural and uncoloured reproduction of ATC monitors. A combination that will present your favourite recordings just as the recording engineer intended. He was probably using ATC to master the recording anyway!
Who are ATC
Formed in 1974 by Billy Woodman to manufacture custom drive units for the professional sound industry, ATC quickly made its mark with the 12″ PA75-314 driver, a design capable of handling more power and producing less distortion at a higher sound pressure level than any other unit on the market. Having established a market for reference quality precision-made monitors, a succession of smaller ATC speakers then evolved, ranging from SCM7s through 10s and 20s. Available in both active and passive versions, they offered elite ATC performance and reliability to many new customers.
Through ATC’s commitment to multi-channel mastering and its direct involvement with leading players in the professional audio industry including Sony Music and Telarc, ATC’s products are installed at some of the world’s most prestigious multi-channel studios and auditoria. Wherever the best is required you will find ATC.
Output Power into 8 ohms :150W
Input Sensitivity :350mV
Input Impedance :22k ohms
Frequency Response :5Hz - 200KHz ±0.1dB
Signal / Noise Ratio :>100dB
Crosstalk :>90dB
Dimensions (HxWxD):135x435x325
Weight (HxWxD):20kg / 44lbs
150 watts per channel.
Class A/B operation.
Hand built in the UK.
5 RCA inputs.
Record, sub and pre outputs.
Headphone jack.
Remote control.
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details
-
ATC CA2 Stereo Pre-Amplifier£3,100.00
-
ATC CDA2 Mk2 - CD DAC Pre-Amplifier£3,100.00
-
ATC SCM11 2-Way Passive Loudspeakers£1,650.00
-
ATC SCM40 3-Way Passive Loudspeakers£4,750.00