Vertere Acoustics DG-1 Dynamic Groove Turntable - Ex Display

This Vertere DG-1 Turntable has been on display in our Hereford store for the last 12 months and is now for sale due to the release of the new DG-1S.

This turntable is in perfect working condition and comes with a 5-year warranty once registered online. The unit will be delivered in its original transit packaging with all original accessories. 

Cosmetically the turntable is in very good condition with the only signs of use being the high gloss acrylic plinth and platter which lightly mark from cleaning and use due to the nature of the material. The lid is unused so is in great condition, still with its protective film in place. Please see the photos before purchasing and call us on 01432 354921 to book a demonstration.

Vertere Acoustics DG-1 Dynamic Groove Turntable D-Fi Package (Standard)

Includes -

DG-1 Dynamic Groove Record Player

D-Fi interconnect cable

The DG-1 is Vertere’s simplest turntable but is also among their most innovative. The DG-1 is as close as you can get to plug-and-play usability from a high-end, high-performance turntable, with an outstanding amount of attention to detail in each and every component. Rather than simply replicate Vertere’s high-end turntables, just with cheaper materials, Vertere started from scratch. Using their philosophy that every component matters, systematically working through the entire turntable, from the stylus to cables, to remove any bottleneck to its performance.

The turntable starts with the motor. Vertere’s hand-tuned 24-pole Precision Synchronous motor is designed to provide smooth and stable playback with incredibly low levels of noise, thanks to its off-board power supply.

The platter is driven via a precision machined aluminium alloy pulley on the motor and a bespoke silicon rubber drive belt for smoothness and durability, while electronic speed change, via a switch to the rear of the plinth top plate, adds to the ease of use and removes any need for belt-handling.

Like the pulley, the platter itself is also a precision-machined alloy, to the top of which is bonded a PETG record interface mat. On the underside a cork/Neoprene/nitrile bonded disc controls platter resonance. This platter rotates on a highly polished stainless steel spindle, which rides in the main bearing housing using a super precision tungsten carbide ball, avoiding the need for complex regimes of lubrication, while still retaining the smoothness of rotation essential for the accurate playback of records. Another example of the many ways Vertere have designed the DG-1 to be as simple as possible.

The ‘Groove Runner’ tonearm is perhaps the most unique-looking tonearm we’ve seen in a long time and is one of Vertere’s unique designs. Using flat beams in place of the usual tubes on most turntables. This reduces any unwanted resonances, which would usually require complicated dampening. The DG-1 uses a 3-layer non-resonant tone arm to avoid all of the problems. This simple design is shown in the tone arm wiring too, where in place of the conventional wiring, a flat PCB is sandwiched into the arm itself, to carry signal from the cartridge to the output terminals with no interruptions or degradation.

Much like the tone arm, the DG-1’s plinth is a sandwiched, non-resonant design. Using cast acrylic, with a sandwiched layer of silicon rubber isolation, all sat on a steel chassis to provide unseen levels of stability and rigidity without any unwanted resonances or vibrations. The DG-1 also comes complete with a non-resonant acrylic dust cover, where its hinges are integrated into the plinth for a sleek profile.

Who is Vertere Acoustics?  

Vertere Acoustics’ ideology is simple and couldn’t be more true. It’s that any Hifi System is only as good as its weakest link. Everything, including the cables, tonearm and every part of their equipment, must be balanced and engineered with care, attention and passion, to get the absolute best from your favourite album.

Vertere engineers all of its products from the ground up, starting with the fundamentals of cutting and producing a record to get as close to the original recording as possible.

That may sound like a simple ‘less is more philosophy, but we prefer to look at it this way: the best audio equipment shouldn’t add anything to the original recording. Rather it should affect it as little as possible; bringing the listener ever closer to what the artist, producer and mastering engineer wanted you to hear.

Vertere Acoustics was founded by Touraj Moghaddam, designer of Roksan’s ever popular & infamous Xerxes turntable. Over the last decade, Touraj has been refining his designs to produce some of the world's finest turntables, with a frightening amount of time, effort and attention to detail put into each and every one.